What a cap installation is priced on
Chimney cap installation cost in Beverly Hills is set by the chimney, not by a standard cap off a shelf. A cap on an older chimney is sized to the flue tile the chimney was originally built with, and that size, the number of flues and the metal you choose are what the quote is built from. We write the price after we have measured, so that it is a number for your chimney and nobody else's.
Heritage Chimney Care looks after the older chimneys of Beverly Hills and the Westside: original brick, clay tile liners and period fireplaces. A cap is a small part with a large job, and on an old stack it has to fit what is already there. Ask for a cap quote and send a photo of the chimney top if you can. The photo helps us plan, and we quote after we measure the flue.
What the cap does
A missing or failed chimney cap leaves the flue wide open to rain, animals and debris. The cap we fit has three parts to its job:
- - A stainless steel or copper hood that keeps rain off the flue
- A spark arrestor mesh, included on every cap
- A mesh sized to keep animals and debris out
On an older chimney, the clay tile liner is the part that suffers when water gets in, and the brick below is next. A good cap is cheap protection for both.
What sets the cost
We do not print a flat price for a cap, because these are the things that decide it:
- - Flue tile size: the cap is made to the real dimensions, not a generic size.
- Number of flues: a multi-flue chimney needs custom sizing, with one cap per flue or a larger cap over the crown.
- Metal: stainless steel or copper. Copper is priced on its own line and weathers differently over time.
- The state of the crown: the old cap comes off and the crown is cleaned. If the crown is cracked, that repair is a separate line.
- Height and roof access.
- Coastal exposure, which calls for mounting built for wind.
You get each factor on paper. If the quote has a crown line, it is there because the crown needs it.
How an older chimney is measured
On a chimney built decades ago, the flue tile size can differ from one chimney to the next. So we measure on site, by hand, at the top of the stack. The technician photographs the crown, the tile and the existing cap, and the photo report names each part and its likely age.
That report is useful beyond the cap. If a buyer, an agent or a neighbor asks about the chimney, you have a record. Book the measuring visit and mention the age of the house if you know it.
Beverly Hills chimneys
Beverly Hills became a city in 1914, and a good share of its houses went up in the two decades after. Those chimneys are our everyday work: original brick, clay tile liners and fireplaces we would rather repair than replace. The flats filled in through the 1920s and 1930s with Spanish, Tudor and Mediterranean houses. Trousdale Estates and many hillside lots came later, in the 1950s and 1960s, often with a very different kind of fireplace.
For a cap, that means we do not assume. A tall Tudor stack with two flues and a hillside chimney from the 1960s are measured separately. We keep carved stone, tile and original brick wherever they are sound, and the cap goes on without asking the chimney to change.
Stainless or copper
Both metals work. The choice is about the house.
| Metal | What it suits |
|---|---|
| Stainless steel | A cap you do not think about again, in a plain finish |
| Copper | A period house where the cap is seen from the street and a weathering metal suits the house |
We tell you the difference in plain words and show you both on the quote. You choose.
The day of the install
The old cap comes off, the crown is cleaned, and the new cap goes on the flue tile. Multi-flue stacks are fitted one flue at a time. When the cap is on, we photograph the finished work next to the before photo, so the record shows what changed and what was left alone. If the crown looked sound, nothing else is touched.
Choosing who fits the cap
Ask each company:
- - Will you measure the flue tile, or order a standard size?
- Does the cap include spark arrestor mesh?
- Is the mesh sized to keep animals and debris out?
- What happens to the old cap and the crown?
- Do you fit copper as well as stainless?
- Do you photograph the crown before and after?
A cap that is a size off does not seal, and you find out in the next storm.
What to have ready
- - A photo of the chimney top, if you can get one from a window or the ground
- The number of flues you can count
- The approximate age of the house
- Whether there is a crack or stain you have noticed on the crown
Book the cap installation
Heritage keeps phones open 7:00 AM to 7:00 PM, weekends too. A photo of the chimney top on the form or a call to (747) 216-0319 gets the measuring visit going, and the quote comes in writing.
Need Professional Chimney Service?
Our technicians are ready to help with all your chimney and fireplace needs. Contact Heritage Chimney Care today for expert service throughout the Westside Los Angeles service area.




