Gas logs in an original fireplace
Gas log installation in Beverly Hills is a good fit for a house with an old wood-burning fireplace that you want to keep and stop feeding. Gas logs turn the fireplace into a clean, low-maintenance heat source without touching the original masonry. The carved stone, the tile and the brick stay as they were built.
Heritage Chimney Care looks after the older chimneys of Beverly Hills and the Westside, and keeping an original fireplace in use where it is sound is the point of our work. We fit either a vented or a ventless set to your existing firebox, and we handle the gas line connection, the damper clamp and the BTU sizing. To get a set priced for your fireplace, ask for a gas log quote and send a photo of the firebox.
Vented or ventless
The choice decides much of the install, so it is the first thing we explain:
- - Vented sets burn with the damper open and send the products of combustion up the flue. A damper clamp is installed so the damper stays open when the burner is in use.
- Ventless sets are a different product with different rules for the room. We go through them with you before you choose.
Both are in our scope. We tell you which suits your firebox and why, and you decide with the quote in front of you.
What the install includes
The work covers the full path from the gas supply to the logs:
- - A vented or a ventless set, whichever suits the firebox
- Heat output sized in BTUs to the room and the opening
- The gas line connected, with a shut-off valve you can reach
- A clamp that holds the damper open on a vented set
- Logs in ceramic fiber or refractory material
- A remote or a wall switch, if you want one
The sizing is worth a word. A set that is too large for the firebox or the room is a poor fit, and one that is too small leaves the fireplace as an ornament. We size to both, on paper, before the order.
What sets the price
We do not post a price for a log set, because the number depends on what you choose and what your house needs. The quote is built from:
- - The set: size, log style and whether it is ceramic fiber or refractory.
- Vented or ventless.
- The burner and its controls, including a remote or a wall switch.
- The gas line: how far it runs from the supply and whether a shut-off is already in place.
- The state of the firebox and flue, which we check before fitting.
- The damper clamp, on vented sets.
Each is a line on paper. If the first visit finds that the flue or firebox needs attention before a burner goes in, that appears as its own line.
How the visit goes
The first visit begins with the fireplace you have. We look at the firebox, the damper and each flue on the property, and we write up a photo report that names every part and its likely age. On a house with several fireplaces, each one gets its own page.
Then we measure for the set and quote it. Request the measuring visit and tell us whether the fireplace is in use now, so we know what the flue has been through.
Beverly Hills fireplaces
Beverly Hills became a city in 1914, and a good share of its houses went up in the two decades after. The flats filled in through the 1920s and 1930s with Spanish, Tudor and Mediterranean houses. Trousdale Estates and many hillside lots came later, in the 1950s and 1960s, often with a very different kind of fireplace.
That matters for a gas log job. An original firebox with a carved stone or tile surround is something to protect, and a set is fitted so the surround stays untouched. A fireplace from the 1950s or 1960s is measured on its own terms. Either way, you are not asked to change what the house was built with.
Choosing who installs gas logs
Ask each company:
- - Will you size the set to the firebox and the room, in BTUs?
- Is the gas line connection with a shut-off valve in the quote?
- On a vented set, is a damper clamp part of the fit?
- Will you check the flue before you fit the burner?
- Are ceramic fiber and refractory logs both offered?
- Will the surround and the original masonry be left as they are?
A company that fits a set without looking at the flue has not finished the job.
If the fireplace cannot take gas logs
Sometimes the fireplace is not sound enough, and we say so. In that case the repair comes first, and the gas logs come after. We would rather repair an original firebox than replace it, and a report that explains the order gives you a plan instead of a refusal.
What to have ready
- - A photo of the firebox, straight on
- Whether a gas line already reaches the fireplace
- Vented, ventless or undecided
- Whether you want a remote or a wall switch
Book the installation
Heritage answers every day from 7:00 AM to 7:00 PM. Send a photo of the fireplace through the form or ring (747) 216-0319, and we will measure, size the set and write the quote.
Need Professional Chimney Service?
Our technicians are ready to help with all your chimney and fireplace needs. Contact Heritage Chimney Care today for expert service throughout the Westside Los Angeles service area.




